[1] Branco J M, Piazza M, Cruz P J S, 2010. Structural analysis of two king-post timber trusses:non-destructive evaluation and load-carrying tests. Construction and Building Materials, 24(3):371-383. DOI: 10.1016/j.conbuildmat.2009.08.025.
[2] He M J, Sun Y L, 2008. Test and load-bearing capacity of metal plate connected joint. Special Structures, 25(1):1-5.
[3] Huang H, He M J, 2009. Use and design of light-frame wooden structure. Architecture Technology, 40(9):815-818. DOI: 1000-4726(2009)09-0815-04
[4] Liu Y J, Fu M Z, Liu S L, et al., 2013. Modern timber bridges and their structure types. Journal of Architecture and Civil Engineering, 30(1):83-91. DOI:10.3969/j.issn.1673-2049.2013. 01.012.
[5] Madsen B, Buchanan A H, 1986. Size effects in timber explained by a modified weakest link theory. Canadian Journal of Civil Engineering, 13(2):218-232. DOI: 10.1139/l86-030.
[6] Ministry of Housing and Urban-Rural Development of China, 2012. Technical Code for Light Wood Truss: JGJ/T 265 (2012). Beijing: China Architecture and Building Press.
[7] Que Z L, Gao Y F, Ge X Y, et al., 2017. A review of the research of wood girder truss. Journal of Forestry Engineering, (2):138-144. DOI: 10.13360/j.issn.2096-1359.2017.02.023.
[8] Que Z L, Li Z R, Mao H Y, et al., 2016. The influence of bending performance by the variations in wood density and knot of SPF dimension lumber. China Forest Products Industry, 43(3):16-18, 23. DOI:10.3969/j.issn.1001-5299. 2016.03.004.
[9] Que Z, Yang L, Fu Q, et al., 2012. Modes and causes of structural failure of timber structures. China Wood-Based Panels, 19(11):15-18.
[10] Standardization Administration of China, 2003. Code for Design of Timber Structures, Standardization Administration of China: GB 50005 (2003). Beijing: Standards Press of China.
[11] Standardization Administration of China, 2009a. General Requirements for Physical and Mechanical Tests of Wood: GB/T 1928 (2009). Beijing: Standards Press of China.
[12] Standardization Administration of China, 2009b. Method for Determination of the Moisture Content of Wood: GB/T 1931-2009 (2009). Beijing: Standards Press of China.
[13] Standardization Administration of China, 2012a. Load Code for the Design of Building Structures: GB 50009 (2012). Beijing: Standards Press of China.
[14] Standardization Administration of China, 2012b. Standard of Timber Structure Test Method: GB/T 50329 (2012). Beijing: Standards Press of China.
[15] Stehn L, Börjes K, 2004. The influence of nail ductility on the load capacity of a glulam truss structure. Engineering Struct-ures, 26(6):809-816. DOI:10.1016/j.engstruct.2004. 01.012.
[16] Villar J R, Guaita M, Vidal P, 2008. Numerical simulation of framed joints in sawn-timber roof trusses. Spanish Journal of Agricultural Research, 6(4):508. DOI:10.5424/sjar/2008064- 345.
[17] Xu X L, 2006. Research on bearing capacity of light wood truss. Shanghai: Tongji University.
[18] Zhou H B, Jiang J H, Wang X S, et al., 2012. Size effects of width on tensile strength of visually-graded Chinese larch lumber. Journal of Beijing Forestry University, 34(1):127- 130. DOI: 10.13332/j.1000-1522.2012.01.007.