Citation: | Jiankun Liang, Quan Li, Zhigang Wu, Guanben Du, Taohong Li, Hong Lei. Competitive polycondensation of model compound (MUF) resin system by 13C NMR[J]. Journal of Bioresources and Bioproducts, 2020, 5(1): 60-66. doi: 10.1016/j.jobab.2020.03.007 |
Melamine-urea-formaldehyde (MUF) resin is an excellent adhesive in the field of wood adhesives, however the com-petition mechanism is questionable which affects the structure control and performance optimization of the resin. In this sduty, the competitive resin synthesis polycondensation reaction of MUF system under alkaline condition was studied based on the model compound 1, 3-dihydroxymethyl urea (UF2) and melamine (M) system, and the competitive reaction mechanism in the system was deduced by 13C NMR quantitative analysis. The results show that the energy barrier of hydroxymethylation of melamine is lower than that of urea, and the priority of hydroxymethylation is lower; the addition of melamine results in a large amount of hydrolysis of UF2, and the formed free formaldehyde, resulting in hydroxymethylation of melamine; there is obvious polycondensation reaction in UF2+M system, mainly from the relationship between Hydroxymethylurea and melamine or hydroxymethylmelamine. The type I bridge bond structure of polycondensation mainly comes from the reaction of UF2 and M, which is difficult to form the type II bridge bond. At low molar ratio, the formation of bridge bond is superior to that of ether bond. With the increase of molar ratio, the formation of ether bond shows advantages, but there is obvious competition between them. There may be competitive presence of the UF self-condensation products, melamine-formaldehyde (MF) self-condensation products and MUF co-condensed products after the polycondensation reaction.
Angelatos, A.S., Burgar, M.I., Dunlop, N., Separovic, F., 2004. NMR structural elucidation of amino resins. J. Appl. Polym. Sci. 91, 3504-3512. doi: 10.1002/app.13538
|
Cao, M., Li, T.H., Liang, J.K., Du, G.B., 2017. The influence of pH on the melamine-dimethylurea-formaldehyde Co-condensations:a quantitative 13C-NMR study. Polymers 9, 109. doi: 10.3390/polym9030109
|
Cui, J.Q., Xie, M.J., Yang, S., 2017. Properties of diethylene glycol ether toughening modified melamine-urea-formaldehyde resin. J. For. Eng. 31, 10-14. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=lykjkf201706002
|
Dunky, M., 1998. Urea-formaldehyde (UF) adhesive resins for wood. Int. J. Adhesion Adhesives 18, 95-107. doi: 10.1016/S0143-7496(97)00054-7
|
Dunky, M., 2004. Adhesives based on formaldehyde condensation resins. Macromol. Symp. 217, 417-430. doi: 10.1002/masy.200451338
|
Kim, M.G., 1999. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by 13C NMR spec-troscopy. I. J. Polym. Sci. A Polym. Chem. 37, 995-1007. doi: 10.1002/(SICI)1099-0518(19990401)37:7<995::AID-POLA14>3.0.CO;2-6
|
Kim, M.G., 2000. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by 13C-NMR spec-troscopy. II. J. Appl. Polym. Sci. 75, 1243-1254. doi: 10.1002/(SICI)1097-4628(20000307)75:10<1243::AID-APP5>3.0.CO;2-F
|
Kim, M.G., 2001. Examination of selected synthesis parameters for wood adhesive-type urea-formaldehyde resins by 13C NMR spectroscopy. III. J. Appl. Polym. Sci. 80, 2800-2814. doi: 10.1002/app.1397
|
Li, T.H., 2015. Study on the mechanisms of the reactions in synthesis of amino resins used as wood adhesives. Nanjing: Nanjing Forestry Uni-versity.
|
Li, T.H., Guo, X.S., Liang, J.K., Wang, H., Xie, X.G., Du, G.B., 2015. Competitive formation of the methylene and methylene ether bridges in the urea-formaldehyde reaction in alkaline solution:a combined experimental and theoretical study. Wood Sci. Technol. 49, 475-493. doi: 10.1007/s00226-015-0711-2
|
Liang, J.K., Li, T.H., Cao, M., 2017. Study on the competitive relationships of the base-catalytic melamine formaldehyde system. J For. Environ. 37, 251-256.
|
Liang, J.K., Li, T.H., Guo, X.S., 2014. Study on copolycondensation between dimethylol urea and melamine. China Adhesives 23, 1-4, 9. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zgjnj201405001
|
Liao, J.J., Zhou, X.J., Du, G.B., 2016. Effects of different poly(amidoamine) s additions on the properties of hyperbranched polymer modified urea-formaldehyde resin. J For. Eng. 1, 21-26. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=lykjkf201603004
|
Park, B.D., Kim, J.W., 2008. Dynamic mechanical analysis of urea-formaldehyde resin adhesives with different formaldehyde-to-urea molar ratios. J. Appl. Polym. Sci. 108, 2045-2051. doi: 10.1002/app.27595
|
Siimer, K., Pehk, T., Christjanson, P., 1999. Study of the structural changes in urea-formaldehyde condensates during synthesis. Macromol. Symp. 148, 149-156. doi: 10.1002/masy.19991480113
|
Tomita, B., Hse, C.Y., 1995. Analyses of cocondensation of melamine and urea through formaldehyde with Carbon 13 Nuclear Magnetic Res-onance Spectroscopy. Journal of the Japan Wood Research Society 41, 349-354.
|
Wang, B., Zhang, Y. H., Tan, H. Y., 2018.Study on advance of melamine modified urea formaldehyde resin. New Chem. Mater. 46, 234-237, 241. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hgxxcl201802059
|
Zhang, J., Liang, J.K., Du, G.B., 2018. Melamine formaldehyde resin modified tannin furfuryl alcohol resin grinding wheel. J. For.. Environ. 38, 123-127.
|