Volume 6 Issue 3
Jul.  2021
Turn off MathJax
Article Contents
Xinyue Zhao, Yujie Huang, Haiyan Fu, Yunlu Wang, Zheng Wang, Usama Sayed. Deflection test and modal analysis of lightweight timber floors[J]. Journal of Bioresources and Bioproducts, 2021, 6(3): 266-278. doi: 10.1016/j.jobab.2021.03.004
Citation: Xinyue Zhao, Yujie Huang, Haiyan Fu, Yunlu Wang, Zheng Wang, Usama Sayed. Deflection test and modal analysis of lightweight timber floors[J]. Journal of Bioresources and Bioproducts, 2021, 6(3): 266-278. doi: 10.1016/j.jobab.2021.03.004

Deflection test and modal analysis of lightweight timber floors

doi: 10.1016/j.jobab.2021.03.004
More Information
  • Corresponding author: Corresponding author. College of Materials and Engineering, Nanjing Forestry University, Nanjing 210037, China
    Email address: wangzheng63258@163.com (Zheng Wang).
  • Received Date: 2020-06-11
  • Accepted Date: 2020-09-25
  • Rev Recd Date: 2020-09-18
  • Available Online: 2021-04-06
  • Publish Date: 2021-07-21
  • In order to meet the objective requirements of the safety and comfort of the modern lightweight timber floors, and strengthen the research on the coupling performance of the lightweight timber floors vibration characteristics and the building comfort, this article discusses the floor of a two-story prefabricated lightweight timber building demonstration house. In this paper, the floor structure of a two-story light-weight wooden house has been carried out on structural calculation modal and experimental modal, static uniform load and concentrated load de flection value testing. The evaluation of the deflection value of the floor structure, the mode shape, the coupling of the fundamental frequency mode parameters, and the vibration comfort were also studied. The results show that the fundamental frequency simulation value, one-way modal test value and two-way modal test value of the floor structure all meet the requirements of BS-6472 (BS6472-1: 2008). That is, the floor structure is not lower than 8 Hz design requirements, and meets the frequency of BS-6472(BS6472-1: 2008). The weighted root mean square acceleration is lower than the requirement of 0.45 m/s2; the first three natural frequencies of the floor structure calculated by the finite element simulation are 16.413, 31.847 and 48.921 Hz, and the fundamental frequency mode is the bending vibration in the length and width directions. The second order is the bending mode in the length direction, and the third order is the bending mode in the width direction. The fundamental frequency of the two-way modal test of the floor structure is the first-order bending mode in the X direction; and the second-order natural frequency is the second-order bending vibration shape in the X direction. when the uniform load is mainly the weight of floor own, the simulated maximum deflection value is 1.0658 mm; the simulation is performed according to the standard value of 0.566 kN/m for the uniform load of the floor design, and the simulation is the largest. The maximum deflection value of the simulated floor is 1.47383 mm at its midpoint, which meets the requirements of National Building Code of Canada-2015 (NBCC). The maximum deflection limit of the light wood structure floor system is lower than 3 m and the maximum deflection limit is 2 mm; the six deflection value test lines simulated under a concentrated load of 1 kN all present a parabolic distribution and are symmetrical. The above results has engineering application value for promoting the research on the vibration characteristics of the fabricated lightweight timber floors structure and its optimization design.

     

  • loading
  • Cao, S.Q., Zhang, W.D., Xiang, L.X., 2001. Modal analysis of vibrating structures-theory. Experiment and application. Tianjin: Tianjin University Press.
    Chen, J., She, X.X., Liu, Q.S., 2011. Modal testing and vertical vibration serviceability analysis of large-span pre-stressed concrete floor of Training Hall in Qingdao Sport Center. Build. Struct. 41, 115–119. http://en.cnki.com.cn/Article_en/CJFDTOTAL-JCJG201108026.htm
    Chik, T.T., Yew, T.A., Ibrahim, M.W., Yusoff, N.A., 2019. Vibration criteria analysis on floor at laboratory room. IOP Conf. Ser. : Earth Environ. Sci. 220, 012021. doi: 10.1088/1755-1315/220/1/012021
    Corbi, I., Corbi, O., Li, H.T., 2020. Convolutive PD controller for hybrid improvement of dynamic structural systems. Soil Dyn. Earthq. Eng. 137, 106255. doi: 10.1016/j.soildyn.2020.106255
    Crocker, M.J., Price, A.J., 1969. Sound transmission using statistical energy analysis. J. Sound Vib. 9, 469–486. doi: 10.1016/0022-460X(69)90185-0
    Ding, J.W., 2013. Experimental study on vibration comfort of reinforced truss concrete bidirectional composite floor. Hefei: Hefei University of Technology.
    Ellingwood, B., Tallin, A., 1984. Structural serviceability: floor vibrations. J. Struct. Eng. 110, 401–418. doi: 10.1061/(ASCE)0733-9445(1984)110:2(401)
    Gavriloaia, C., Corduban, C., Isopescu, D., Ţăranu, N., Budescu, M., 2014. Calibration of a wooden floor calculation model based on the experimentally determined dynamic characteristics. Key Eng. Mater. 601, 211–214. doi: 10.4028/www.scientific.net/KEM.601.211
    Hu, L.J., 2000. Serviceability design criteria for commercial and multi-family floors. Canadian, Votoria: Canadian Forestry Service.
    Jarnerö, K., Brandt, A., Olsson, A., 2015. Vibration properties of a timber floor assessed in laboratory and during construction. Eng. Struct. 82, 44–54. doi: 10.1016/j.engstruct.2014.10.019
    Li, H.T., Qiu, Z.Y., Wu, G., Wei, D.D., Lorenzo, R., Yuan, C.G., Zhang, H.Z., Liu, R., 2019a. Compression behaviors of parallel bamboo strand lumber under static loading. J. Renew. Mater. 7, 583–600. doi: 10.32604/jrm.2019.07592
    Li, H.T., Wu, G., Xiong, Z.H., Corbi, I., Corbi, O., Xiong, X.H., Zhang, H.Z., Qiu, Z.Y., 2019b. Length and orientation direction effect on static bending properties of laminated Moso bamboo. Eur. J. Wood Wood Prod. 77, 547–557. doi: 10.1007/s00107-019-01419-6
    Li, J., 2016. Study on the static performance and vibration comfort of prestressed concrete floor with rigid girder. Lanzhou: Lanzhou University.
    Lorenzo, R., Godina, M., Mimendi, L., Li, H.T., 2020a. Determination of the physical and mechanical properties of moso, Guadua and oldhamii bamboo assisted by robotic fabrication. J. Wood Sci. 66, 1–11. doi: 10.1186/s10086-020-1848-7
    Lorenzo, R., Mimendi, L., Li, H.T., Yang, D., 2020b. Bimodulus bending model for bamboo poles. Constr. Build. Mater. 262, 120876. http://www.sciencedirect.com/science/article/pii/S0950061820328816
    Ohlsson, S., 1988a. Ten years of floor vibration research a review of aspects and some results. Proceedings of the Symposium/Workshop on Serviceability of Buildings (Movements, Deflections, Vibrations), 1, 435–450.
    Ohlsson, S., 1988b. Springiness and human induced floor vibration a design guide. Stockholm: Swedish Council for Building Research Document D12.
    Rijal, R., Samali, B., Shrestha, R., Crews, K., 2016. Experimental and analytical study on dynamic performance of timber floor modules (timber beams). Constr. Build. Mater. 122, 391–399. doi: 10.1016/j.conbuildmat.2016.06.027
    Sjökvist, L.G., Brunskog, J., 2013. An experimental and statistical study of the behavior of the vibration field in two coupled lightweight wooden joist floors. Appl. Acoust. 74, 517–520. doi: 10.1016/j.apacoust.2012.09.006
    Wang, Z., Cao, Y., Wang, Y.L., Li, M.M., 2017. Testing shear modulus of materials based on torsional mode of cantilever plate. Sci. Silvae Sin. 53, 101–112. http://www.researchgate.net/publication/320692946_Testing_Shear_Modulus_of_Materials_Based_on_Torsional_Mode_of_Cantilever_Plate
    Wang, Z.H., Gao, Z.Z., Wang, Y.L., Cao, Y., Wang, G.G., Liu, B., Wang, Z., 2015. A new dynamic testing method for elastic, shear modulus and Poisson's ratio of concrete. Constr. Build. Mater. 100, 129–135. doi: 10.1016/j.conbuildmat.2015.09.060
    Yu, Q.H., 2001. Application of experimental modal analysis in construction machinery. Journal of Beijing Institute of Civil Engineering and Architecture, 4, 90–93.
    Zhang, C.C., 2013. Research on the comfort level of man-made vibration of slanted arch supported ring floor. Harbin: Harbin Institute of Technology.
    Zhou, H.B., 2006. Study on the design method of sound insulation of wooden structure wall and floor vibration reduction. Beijing: Chinese Academy of Forestry.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(14)  / Tables(6)

    Article Metrics

    Article views (501) PDF downloads(10) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return