Volume 9 Issue 3
Jul.  2024
Turn off MathJax
Article Contents
Zhiqiang Fu, Tong Zhao, Hu Wang, Jingyi Wei, Haozhe Liu, Liying Duan, Yan Wang, Ruixiang Yan. Study on the mechanism and law of temperature, humidity and moisture content on the mechanical properties of molded fiber products[J]. Journal of Bioresources and Bioproducts, 2024, 9(3): 351-368. doi: 10.1016/j.jobab.2024.04.003
Citation: Zhiqiang Fu, Tong Zhao, Hu Wang, Jingyi Wei, Haozhe Liu, Liying Duan, Yan Wang, Ruixiang Yan. Study on the mechanism and law of temperature, humidity and moisture content on the mechanical properties of molded fiber products[J]. Journal of Bioresources and Bioproducts, 2024, 9(3): 351-368. doi: 10.1016/j.jobab.2024.04.003

Study on the mechanism and law of temperature, humidity and moisture content on the mechanical properties of molded fiber products

doi: 10.1016/j.jobab.2024.04.003
Funds:

The authors thank to the support from Tianjin University of Science and Technology Packaging Innovation Laboratory,State Key Laboratory of Biobased Fiber Manufacturing Technology,Tianjin Key Laboratory of Pulp and Paper,and China Light Industry Key Laboratory of Papermaking and Biorefinery for providing experimental equipment and site support.This work was supported by Tianjin Municipal Education Commission (No.2019KJ209).

  • Publish Date: 2024-07-05
  • The change of temperature, humidity and moisture content (MC) will lead to the change of mechanical properties of molded fiber products (MFP). However, it is difficult to decouple the effects of temperature, humidity and MC on the mechanical properties of MFP, and predict the mechanical properties of MFP during the use. In this study, the laws and mechanism of mechanical properties of MFP with ambient temperature, humidity and MC were studied. The results showed that the direct effect of temperature (20-70℃) on mechanical properties of MFP was insignificant, and the mechanical properties of MFP were mainly changed by MC. The MC was related to ambient temperature and humidity, and the relationship between the three could be described by the modified Guggenheim-Anderson-de Boer (GAB) model (20-70℃ and 30%-90 % relative humidity). With the increase of MC, the elastic modulus and fracture strain was increased and decreased linearly, the yield strength and failure strength were presented GaussAmp laws, and the failure strain was presented asymptotic regressed distribution law. Two fracture modes of MFP, brittle fracture and ductile fracture, were revealed by the scanning electron microscopy of the mesoscopic fiber structure of sugarcane bagasse molded fiber products. The mathematical models and the changes of fiber structure were verified by wheat straw molded fiber products and waste paper molded fiber products. This study was contributed to understand the effects and mechanism of the change of temperature, humidity and MC on the mechanical properties of MFP.

     

  • loading
  • [1]
    Abdul Khalil, H.P.S., Bhat, I.U.H., Jawaid, M., Zaidon, A., Hermawan, D., Hadi, Y.S., 2012. Bamboo fibre reinforced biocomposites: a review. Mater. Des. 42, 353-368.
    [2]
    Al-musawi, H., Huber, C., Grabner, M., Ungerer, B., Krenke, T., Matz, P., Teischinger, A., Müller, U., 2023. Compressive strength of beech and birch at different moisture contents and temperatures. J. Mater. Sci. 58, 13994-14008.
    [3]
    Alptekin, A., Çallioğlu, H., 2023. Mechanical properties of starch bio-composite and molded pulp samples manufactured using pine and eucalyptus fibers. Polym. Polym. Compos. 31, 096739112311619.
    [4]
    Aviara, N.A., 2020. Moisture sorption isotherms and isotherm model performance evaluation for food and agricultural products. In: George, K. and Nikolaos, L. (Eds). Sorption in 2020s. London: IntechOpen.
    [5]
    Azmin, S.N.H.M., Hayat, N.A.B.M., Nor, M.S.M., 2020. Development and characterization of food packaging bioplastic film from cocoa pod husk cellulose incorporated with sugarcane bagasse fibre. J. Bioresour. Bioprod. 5, 248-255.
    [6]
    Baumann, G., Brandner, R., Müller, U., Kumpenza, C., Stadlmann, A., Feist, F., 2020. Temperature-related properties of solid birch wood under quasi-static and dynamic bending. Materials13, 5518.
    [7]
    Chen, Q., Yuan, J., Sun, F.B., Zhang, S.B., Xiao, H., Chen, Y.Z., Jia, S.S., Xie, J.L., Qi, J.Q., Fei, B.H., Lu, Y.L., 2023. Real-time flexural fracture behaviors and toughening mechanisms of bamboo slivers with different fiber content and moisture content. Eng. Fract. Mech. 288, 109244.
    [8]
    Curling, S.F., Laflin, N., Davies, G.M., Ormondroyd, G.A., Elias, R.M., 2017. Feasibility of using straw in a strong, thin, pulp moulded packaging material. Ind. Crops Prod. 97, 395-400.
    [9]
    Debnath, M., Sarder, R., Pal, L., Hubbe, M.A., 2022. Molded pulp products for sustainable packaging: production rate challenges and product opportunities. Bioresources 17, 3810-3870.
    [10]
    Didone, M., Tosello, G., 2020. Moulded pulp products manufacturing with thermoforming. Packag. Technol. Sci. 34, 71-73.
    [11]
    Dislaire, C., Seantier, B., Muzy, M., Grohens, Y., 2021. Mechanical and hygroscopic properties of molded pulp products using different wood-based cellulose fibers. Polymers (Basel) 13, 3225.
    [12]
    El Hawary, O., Boccarusso, L., Ansell, M.P., Durante, M., Pinto, F., 2023. An overview of natural fiber composites for marine applications. J. Mar. Sci. Eng. 11, 1076.
    [13]
    Fu, Z.Q., Liu, H.Z., Huang, L.Q., Zhang, G.P., Zhao, T., Zhao, Z.J., 2022. Study on the storage time of a cold box based on conduction-convection-radiation coupling. J. Energy Storage 56, 106142.
    [14]
    Guo, X., Ji, H.W., Zheng, H.Y., 2013. Finite element simulation of molded pulp pallet in the dropping process. Appl. Mech. Mater. 469, 209-212.
    [15]
    Gutierrez, M., Maluk, C., 2020. Mechanical behaviour of bamboo at elevated temperatures-experimental studies. Eng. Struct. 220, 110997.
    [16]
    Gonzalez, M.G., Takeuchi, C.P., Perozo, M.C., 2012. Variation of tensile strength parallel to the fiber of bamboo Guadua angustifolia kunth in function of moisture content. Key Eng. Mater. 517, 71-75.
    [17]
    Han, G.C., 2022. Characterization and properties of nanocellulose-enhanced pulp-molded lunch boxes. J. Phys. 2393, 012006.
    [18]
    Haslach, H.W., 2000. The moisture and rate-dependent mechanical properties of paper: a review. Mech. Time Depend. Mater. 4, 169-210.
    [19]
    Hay, F.R., Rezaei, S., Buitink, J., 2022. Seed moisture isotherms, sorption models, and longevity. Front. Plant Sci. 13, 891913.
    [20]
    Hua, G.J., Yang, M.T., Fei, W.M., Lu, F.D., 2020. Poisson's ratios of molded pulp materials by digital image correlation method and uniaxial tensile test. J. Eng. Fibres. Fabr. 15, 155892502090827.
    [21]
    Incropera, F.P., DeWitt, D.P., Bergman, T.L., Lavine, A.S. 2006. Fundamentals of Heat and Mass Transfer (6th ed.). New York: John Wiley & Sons, Inc., 530-540.
    [22]
    Jakovljević, S., Lisjak, D., 2019. Investigation into the effects of humidity on the mechanical and physical properties of bamboo. Constr. Build. Mater. 194, 386-396.
    [23]
    Jarupan, L., Hunsa-Udom, R., Bumbudsanpharoke, N., 2021. Potential use of oil palm fronds for papermaking and application as molded pulp trays for fresh product under simulated cold chain logistics. J. Nat. Fibres. 19, 2772-2784.
    [24]
    Jayas, D.S., Mazza, G., 1993. Comparison of five, three-parameter equations for the description of adsorption data of oats. Trans. ASAE 36, 119-125.
    [25]
    Ji, H.W., Wang, H.W., 2010. Short span compressive stress-strain relation and model of molded pulp material. Key Eng. Mater. 450, 202-205.
    [26]
    Jiang, K.X., Yan, Z., Fang, W.J., Zhang, Y.Q., 2022. Effect of moisture content on the microscopic properties of amorphous cellulose: a molecular dynamics simulations. Mater. Res. Express 9, 125308.
    [27]
    Korkmaz, O., Büyüksarı, U., 2019. Effects of moisture content on mechanical properties of micro-size oak wood. Bioresources 14, 7655-7663.
    [28]
    Kun, G., Xi, W., 2017. Design and analysis of cushioning packaging for home appliances. Procedia Eng. 174, 904-909.
    [29]
    Lang, C.V., Jung, J., Wang, T.R., Zhao, Y.Y., 2022. Investigation of mechanisms and approaches for improving hydrophobicity of molded pulp biocomposites produced from apple pomace. Food Bioprod. Process. 133, 1-15.
    [30]
    Li, S., 1998. Dialectic: the relationship between water activity and relative humidity. J. Microbiol. 18, 64.
    [31]
    Li, X.Z., Mou, Q.Y., Ren, H.Q., Li, X.J., Zhong, Y., 2020. Effects of moisture content and load orientation on dowel-bearing behavior of bamboo scrimber. Constr. Build. Mater. 262, 120864.
    [32]
    Li, Z.H., Tang, J.J., Mao, K.M., Song, H., 2023. Nonlinear compression behavior research of molded pulp material. J. Phys. 2499, 012006.
    [33]
    Liu, C., Luan, P.C., Li, Q., Cheng, Z., Sun, X., Cao, D.X., Zhu, H.L., 2020. Biodegradable, hygienic, and compostable tableware from hybrid sugarcane and bamboo fibers as plastic alternative. Matter 3, 2066-2079.
    [34]
    Luan, P.C., Li, J., He, S.M., Kuang, Y.S., Mo, L.H., Song, T., 2019. Investigation of deposit problem during sugarcane bagasse pulp molded tableware production. J. Clean. Prod. 237, 117856.
    [35]
    Maslinda, A.B., Abdul Majid, M.S., Ridzuan, M.J.M., Afendi, M., Gibson, A.G., 2017. Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites. Compos. Struct. 167, 227-237.
    [36]
    Muzaffar, K., Kumar, P., 2016. Moisture sorption isotherms and storage study of spray dried tamarind pulp powder. Powder Technol. 291, 322-327.
    [37]
    Qin, C.R., Li, J., Wang, W., Li, W., 2022. Improving mechanical strength and water barrier properties of pulp molded product by wet-end added polyamide epichlorohydrin/cationic starch. ACS Omega 7, 22173-22180.
    [38]
    Ramamoorthy, S.K., Skrifvars, M., Persson, A., 2015. A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers. Polym. Rev. 55, 107-162.
    [39]
    Rattanawongkun, P., Kerddonfag, N., Tawichai, N., Intatha, U., Soykeabkaew, N., 2020. Improving agricultural waste pulps via self-blending concept with potential use in moulded pulp packaging. J. Environ. Chem. Eng. 8, 104320.
    [40]
    Salmén, L., 1990. On the interaction between moisture and wood fibre materials. MRS Online Proc. Libr. 197, 193-201.
    [41]
    Semple, K.E., Zhou, C.L., Rojas, O.J., Nkeuwa, W.N., Dai, C.P., 2022. Moulded pulp fibers for disposable food packaging: a state-of-the-art review. Food Packag. Shelf Life 33, 100908.
    [42]
    Shadhin, M., Jayaraman, R., Rahman, M., Mann, D., 2024. Effect of fiber surface treatment on mechanical, interfacial, and moisture absorption properties of cattail fiber-reinforced composites. J. Appl. Polym. Sci. 141, e54765.
    [43]
    Sørensen, G., Hoffmann, J., 2003. Moisture sorption in moulded fibre trays and effect on static compression strength. Packag. Technol. Sci. 16, 159-169.
    [44]
    Sun, X.F., He, M.J., Li, Z., 2020. Novel engineered wood and bamboo composites for structural applications: state-of-art of manufacturing technology and mechanical performance evaluation. Constr. Build. Mater. 249, 118751.
    [45]
    Szewczyk, W., Głowacki, K., 2018. Impact of humidity on energy absorption during paper tensile test. Fibres Text. East. Eur. 26, 116-121.
    [46]
    Tomita, S., Nakano, S., Segi, M., Nishimura, T., 2022. Elastic metamaterial composite made of molded pulp and steel for suppression of low-frequency vibration in thin-plate structures. Mater. Des. 223, 111200.
    [47]
    Teodorescu, I., Erbaşu, R., Branco, J.M., Tăpuşi, D., 2021. Study in the changes of the moisture content in wood. IOP Conf. Ser. 664, 012017.
    [48]
    Wang, B., Xiao, X.R., Astakhov, V.P., Liu, Z.Q., 2019. The effects of stress triaxiality and strain rate on the fracture strain of Ti6Al4V. Eng. Fract. Mech. 219, 106627.
    [49]
    Wang, D.M., Wang, J., Liao, Q.H., 2013. Investigation of mechanical property for paper honeycomb sandwich composite under different temperature and relative humidity. J. Reinf. Plast. Compos. 32, 987-997.
    [50]
    Wang, J.J., Li, Y., Li, Q., Long, Y., Yu, T., Li, Z., 2024. Evolution of stiffness in flax yarn within flax fiber reinforced composites during moisture absorption. Compos. Part B 268, 111096.
    [51]
    Wang, J.J., Li, Y., Yu, T., Li, Q., Li, Z., 2022a. Anisotropic behaviors of moisture absorption and hygroscopic swelling of unidirectional flax fiber reinforced composites. Compos. Struct. 297, 115941.
    [52]
    Wang, M.Q., Harries, K.A., Zhao, Y.X., Xu, Q.F., Wang, Z.L., Leng, Y.B., 2022b. Variation of mechanical properties of P. edulis (Moso) bamboo with moisture content. Constr. Build. Mater. 324, 126629.
    [53]
    Wang, Q., Chen, T., Wang, X.D., Zheng, Y., Zheng, J.Y., Song, G.J., Liu, S.Y., 2023. Recent progress on moisture absorption aging of plant fiber reinforced polymer composites. Polymers15, 4121.
    [54]
    Wang, Z.W., Li, X.F., 2014. Effect of strain rate on cushioning properties of molded pulp products. Mater. Des. 57, 598-607.
    [55]
    Weisser, H., 1985. Influence of Temperature On Sorption equilibria. Properties of Water in Foods. Dordrecht: Springer Netherlands, 95-118.
    [56]
    Wolf, W., Spiess, W.E.L., Jung, G., 1985. Standardization of isotherm measurements (cost-project 90 and 90 BIS). In: Simatos, D., Multon, J.L. (Eds.). Properties of Water in Foods. Dordrecht: Springer, 661-679.
    [57]
    Xiao, Y.Z., Shao, Z.Z., 2015. Effect of temperature on the static compression of molded pulp products. In: Kim, Y.H. (Ed.). Proceedings of the 5th International Conference on Civil Engineering and Transportation 2015. Amsterdam: Atlantis Press, 1786-1791.
    [58]
    Yilmaz Aydin, T., Ozveren, A., 2018. Effects of moisture content on elastic constants of fir wood. Eur. J. Wood Wood Prod. 77, 63-70.
    [59]
    Yimlamai, P., Ardsamang, T., Puthson, P., Somboon, P., Puangsin, B., 2023. Soda pulping of sunn hemp (Crotalaria juncea L.) and its usage in molded pulp packaging. J. Bioresour. Bioprod. 8, 280-291.
    [60]
    Yuan, J., Fang, C.H., Chen, Q., Fei, B.H., 2021. Observing bamboo dimensional change caused by humidity. Constr. Build. Mater. 309, 124988.
    [61]
    Zhang, Y.L., Duan, C., Bokka, S.K., He, Z.B., Ni, Y.H., 2022. Molded fiber and pulp products as green and sustainable alternatives to plastics: a mini review. J. Bioresour. Bioprod. 7, 14-25.
    [62]
    Zhou, W.J., Li, H.T., Chen, C., Corbi, O., 2023. Effect of temperature on axial compressive mechanical properties of bamboo. Constr. Build. Mater. 371, 130734.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (87) PDF downloads(1) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return